Post by bigblue on Oct 25, 2008 9:24:39 GMT -6
In deciding whether or not to buy a Ruger Compact Rifle or their Frontier, both with a 16.5" barrel, I wanted to research the amount of velocity I'd lose. I was able to find this information and thought others might find it useful. Keep in mind that most test barrels are either 26" or 24" long. So when you see printed data on how much velocity your getting with your chosen ammunition or handload, it's based on those barrel lengths. Two exceptions I was able to find were the .44 mag. rifle data and .30 carbine whose test barrel lengths are usually 20".
The Remington Catalog 2003 includes a "Centerfire Rifle Velocity Vs. Barrel Length" table that shows the following velocity changes for barrels shorter or longer than the test barrel length:
MV 2000-2500 fps, the approximate change in MV per 1" change in barrel length is 10 fps.
MV 2500-3000 fps, the approximate change in MV per 1" change in barrel length is 20 fps.
MV 3000-3500 fps, the approximate change in MV per 1" change in barrel length is 30 fps.
MV 3500-4000 fps, the approximate change in MV per 1" change in barrel length is 40 fps.
The 45th Edition of the Lyman Reloading Handbook also has a table showing Center Fire Rifle Velocity Vs. Barrel Length. Their figures apply to barrels between 20 and 26 inches in length and agree with the Remington figures. The Lyman table shows the following approximate velocity changes:
For rifles with muzzle velocities in the 1000-2000 fps range, the change in velocity for each 1" change in barrel length is 5 fps.
For rifles with muzzle velocities in the 2001-2500 fps range, the change in velocity for each 1" change in barrel length is 10 fps.
For rifles with muzzle velocities in the 2501-3000 fps range, the change in velocity for each 1" change in barrel length is 20 fps.
For rifles with muzzle velocities in the 3001-3500 fps range, the change in velocity for each 1" change in barrel length is 30 fps.
For rifles with muzzle velocities in the 3501-4000 fps range, the change in velocity for each 1" change in barrel length is 40 fps.
The 43rd edition of the Lyman reloading Handbook gave some concrete examples of velocity loss for specific calibers and loads. The Lyman technicians chronographed some high velocity cartridges in rifles with barrels ranging in length from 26" down to 22" with the following results:
The average loss for the .243 Win./100 grain bullet was 29 fps per inch.
The average loss for the .264 Win. Mag./140 grain bullet was 32 fps per inch.
The average loss for the .300 H&H Mag./220 grain bullet was 25 fps per inch.
For standard high intensity cartridges in the same test, the Lyman technicians chronographed the cartridges in barrel lengths ranging in length from 24" down to 20" with the following results:
The average loss for the .270 Win./130 grain bullet was 37 fps per inch.
The average loss for the .270 Win./150 grain bullet was 32 fps per inch.
The average loss for the .300 Sav./180 grain bullet was 17 fps per inch.
The average loss for the .30-06/180 grain bullet was 15 fps per inch.
The average loss for the .35 Rem./200 grain bullet was 11 fps per inch.
Don
The Remington Catalog 2003 includes a "Centerfire Rifle Velocity Vs. Barrel Length" table that shows the following velocity changes for barrels shorter or longer than the test barrel length:
MV 2000-2500 fps, the approximate change in MV per 1" change in barrel length is 10 fps.
MV 2500-3000 fps, the approximate change in MV per 1" change in barrel length is 20 fps.
MV 3000-3500 fps, the approximate change in MV per 1" change in barrel length is 30 fps.
MV 3500-4000 fps, the approximate change in MV per 1" change in barrel length is 40 fps.
The 45th Edition of the Lyman Reloading Handbook also has a table showing Center Fire Rifle Velocity Vs. Barrel Length. Their figures apply to barrels between 20 and 26 inches in length and agree with the Remington figures. The Lyman table shows the following approximate velocity changes:
For rifles with muzzle velocities in the 1000-2000 fps range, the change in velocity for each 1" change in barrel length is 5 fps.
For rifles with muzzle velocities in the 2001-2500 fps range, the change in velocity for each 1" change in barrel length is 10 fps.
For rifles with muzzle velocities in the 2501-3000 fps range, the change in velocity for each 1" change in barrel length is 20 fps.
For rifles with muzzle velocities in the 3001-3500 fps range, the change in velocity for each 1" change in barrel length is 30 fps.
For rifles with muzzle velocities in the 3501-4000 fps range, the change in velocity for each 1" change in barrel length is 40 fps.
The 43rd edition of the Lyman reloading Handbook gave some concrete examples of velocity loss for specific calibers and loads. The Lyman technicians chronographed some high velocity cartridges in rifles with barrels ranging in length from 26" down to 22" with the following results:
The average loss for the .243 Win./100 grain bullet was 29 fps per inch.
The average loss for the .264 Win. Mag./140 grain bullet was 32 fps per inch.
The average loss for the .300 H&H Mag./220 grain bullet was 25 fps per inch.
For standard high intensity cartridges in the same test, the Lyman technicians chronographed the cartridges in barrel lengths ranging in length from 24" down to 20" with the following results:
The average loss for the .270 Win./130 grain bullet was 37 fps per inch.
The average loss for the .270 Win./150 grain bullet was 32 fps per inch.
The average loss for the .300 Sav./180 grain bullet was 17 fps per inch.
The average loss for the .30-06/180 grain bullet was 15 fps per inch.
The average loss for the .35 Rem./200 grain bullet was 11 fps per inch.
Don
